Index Thing


The Hippo Techo Blog


121 Posts. Displaying page 13 of 13.

Go to page:

Hide All

Software - OSX
Aug 01, 2020

MacOS - Yosemite to Mojave upgrade on MBP 5,3 (mid-2009).

Close ...
Well – very impressed with DosDude’s macOS patcher. I used the Mojave Patcher on my mid-2009 MBP and it works well. The only issue that seems to occur is the machine doesn’t fully down power on a restart and just hangs with the mouse cursor showing. This also happened occasionally when it was running Yosemite so I can’t entirely blame the patcher. I took the lazy route and did an upgrade rather than a clean install but it’s OK.

I chose to remain with HPFS rather than APFS so automatic software updates will not occur however the machine is running the last major version of Mojave so should be OK.

MBP 5,3 (mid-2009) – 8GB RAM, 480GB SSD, HPFS

Yosemite 10.10.5 → Mojave 10.14.6 (started as Snow Leopard years ago).

Procedure: (fairly much as outlined by DosDude)

1 16GB USB 3.0 stick
2 Download Mojave from target MBP using Mojave Patcher Tool. (Last major version – 10.14.6)
3 Format/Erase USB stick using Disk Utility
4 Create patched installer on USB stick using the Mojave Patcher Tool (took c. 10mins or so)
5 Shutdown then start with option key held down then select USB installer choosing SSD as target for install
6 Install the macOS (suggested 29mins but took c. 50mins)
7 Re-power with option key then select USB installer and select the macOS Post Install (I used the defaults for 5,3 model)
8 Reboot into the new install – Patcher detected some new updates so installed them.

The MBP 5,3 model I have fortunately had a supported wireless card firmware but there is now a patch to fix the unsupported ones as there is for the iSight camera which previously stood a chance of not working but is as good as gold now.

The System Updates in Mojave allowed the updating of a couple of apps as well as the bundled Apple ones (Garageband, etc). A Safari update came through later and appeared to work. I think the limitation on Software Updates if not running APFS applies only to the major version updates maybe.

Just needed to cull a few wee unsupported apps and the printing/networking appears OK.
AirDrop between Macs is OK – iOS devices won’t work on hardware that predates 2012.

In theory Mojave should see this MBP out but there is always the option of moving up to Catalina should I wish to try the absolute 64bit only environment. Big Sur will be a big step too far for this old machine I think and 10 ~ 14 years for a laptop will be pretty darn good! Apple don’t lose since the cash goes towards the iMac anyway.

Software - OSX
Aug 01, 2020

MacOS High Sierra - .webp files icon preview and work with Quick Look

Close ...
Was always annoying how .webp file icons (Google standard) would show as blank and were unsupported in Preview however it seems that support has been enabled (at least partially) without much fanfare in the latest updates to High Sierra (2020-004 security update along with Safari update). The icons now show a wee preview of the file and QuickLook will view the file however if Preview is opened there will be no window shown.

Jan 31, 2019

Yummy FTP Lite – Very slow file uploading, server busy issue

Close ...
Don’t often use FTP but recently encountered a message – ‘Server Busy – Waiting to Upload’ when I connected to my webhost.
The connection would happen quickly and the remote folder list would appear then if I dragged a file from the local to the remote I got the message. Nothing would happen for c. 10-15mins then the connection would timeout and immediately I would get a file overwrite dialog and after OK the file would upload OK. It took a while but I found that the default prefs are set for Multiple Connections (5). I had set it to 2 hoping that it would help but found that it only started working when Multiple Connections was unchecked.
The FTP had been working before but now I think the servers are insisting on 1 connection at a time (this still allows multiple upload of files by the way but over one connection).

Software - OSX
Jan 31, 2019

Installation log saying MacOS Installer failure on boot

Close ...
This happened in the morning when switching on the iMac.
Boot up was quite slow then finished up with an Installation Log of a failed MacOS Installer.
Looked very bad but the fix was to shutdown then Restart whilst holding down the Option key which then shows the bootable volumes. In this case the boot volume was pointing to MacOS Installer rather than the Macintosh HD so I changed it to the Macintosh HD volume and the iMac started OK.

This appeared to be a result of doing the Software Update the previous day (2019-001 10.13.6) which required a restart. I had left the update to happen and when I came back c. 1hr later the screen was black so I plugged in the mouse to the USB to juice it up and immediately the display started again. It looked like the update had worked OK but in the morning however the signs were very different.

Once the correct volume had booted OK I checked the updates and they showed that the iTunes and Safari updates had happened but the security update was still showing UPDATE on the button (the security update is the part that needs the restart which will happen 1 min later unless clicked prior).

At this point I did a whole lot of backing up of data and then restarted the iMac again - sure enough I got the Installation log and the boot volume was set to MacOS Installer.

I then booted into Macintosh HD using the Option key method and redid the Security Update - it proceeded to download c. 1.81GB and then did the install (c. 15 mins or so). The install appeared normal and ended with the logon screen. The Macintosh HD boot now seems to be OK.

Not sure why the MacOS Installer was involved because there is no installer in the Applications folder (I removed the downloaded Mojave copy to avoid inadvertent upgrading action). Also when I applied the Security Update I had all my data volumes (ext USB/TB) disconnected to avoid any tragedies.

Machine is -
iMac 27 2017 4.2GHz i7 40G RAM running 10.13.6 (High Sierra)

Software - OSX
Jul 02, 2018

OSX 10.13.4 High Sierra - File/Folder Icons Incomplete After Copy

Close ...
After copying files/folders into another folder when the new folder is opened some of the files/folders will still have the transient downloading icons. This happens on local copies and to external volumes. If a file with an incorrect icon is moved out of the folder the icon will be corrected but when placed back into the folder the faulty icon will be shown again. I generally find that if I don’t open the new folder for a while the success rate seems a lot better – it is as if the system is to slow in updating the icons after the download is complete. Never encountered the issue prior to High Sierra.
If the target folder is already open for viewing the icons are created/updated correctly.

Jul 02, 2018

Mac/Win Networking - Stick with WORKGROUP in Network Settings

Close ...
Originally tried customising the workgroup settings but found that support for this is flaky – macOS doesn’t seem to hold the setting and ReactOS also had problems in this area so in order to work correctly I just use WORKGROUP which is the MS default and also the default in MacOS. This area of networking is probably seen as ‘legacy’.

Software - OSX
Jul 02, 2018

iMac 2017 (High Sierra) - Unable to install libdvdcss.2.dylib

Close ...
Handbrake was producing .m4v files that were heavily pixellated and broken. Turns out that Handbrake uses VLC to read the source and it requires libdvdcss.2.dylib to be installed.
Sierra/High Sierra will block the install of this file to the /usr/lib folder but it can be done via the Terminal.

sudo mkdir /usr/local/lib/ (if it doesn’t already exist)
sudo cp ~/Downloads/libdvdcss.2.dylib /usr/local/lib/libdvdcss.2.dylib (will ask for password)

Software - OSX
Jul 02, 2018

iMac 2017 (High Sierra) - Volumes Eject Sporadically

Close ...
High Sierra appears to work reasonably well and APFS on the SSD appears OK.

Bug: Intermittently the old RAID disks on the TB give incorrectly ejected notifications with the Volumes sometimes actually unmounting. This can happen quite often at times then be OK for a long time.

Trying a wee app called Semulov which sits in the menubar and monitors the Volumes.

Semulov not stopping issue at all so tried Mountain (paid app) and it seems to be a bit better – it doesn’t stop the issue but auto remounts the volumes. The issue sometimes occurs quite frequently and then is OK for long periods of time.

Thunderbolt appears to be flaky in my experience even more so with High Sierra - the storage subsystem on MacOS is no longer 'trustworthy' unless the slower USB3 is used.

Hardware - Mac
Jul 02, 2018

Mac Mini 2012 - Addition of 6TB LaCie D2 Drive and Error 50

Close ...
Tried a discounted LaCie drive which had be opened previously (used for benchmark testing). This particular model was the TB2/USB3 d2 model. To cut a long story short the drive never worked with TB2 and kept giving error 50 (Error in User Parameter Listing). USB 3 works fine and I use the drive with that as a backup drive.

Install: (OSX 10.11.6 – El Capitan)

Problem 1 – drive could not be seen and it turned out that the drive had been formatted as NTFS so was Read Only on the Mac. Using Disk Utility I was unable to Erase the drive or re-partition, this was because the drive was RO.
Tried the OSX Fuse/NTFS-3G solution nbut NTFS-3G is currently not working on El Capitan/Yosemite.
Tried Paragon for Mac (Seagate drives only) but although the LaCie uses Seagate drives it didn’t work.
Tried a Terminal method which worked – I was able to make the drive partition RW.

sudo nano /etc/fstab (system password is required)
within nano type –

LABEL=New Volume none ntfs rw, auto, no browse

ctrl O – to save
return to write file
ctrl X – to exit nano

Note: fstab is deprecated in OSX (fstab.hd in the etc folder will confirm this) but will still work if used.

Use Disk Utility as normal to Erase (it will show R/W).

The drive was formatted as Mac OS Extended (Journaled) on a MBP USB 2.0 port running 10.10.5 (Yosemite).

Moving the drive to the Mini USB 3.0 port running 10.11.6 (El Capitan) it worked OK.

Problem 2 -
I tried the drive daisy-chained (Mini TB to Lacie 2Big TB to 6TB d2 TB2) and it wouldn’t work. I could read files on the disk but could not trash them or place new files on the drive – error 50 messages were issued. Also tried the drive directly on the Mini (TB to TB2) and still no good. The TB cable was swapped out but no difference.

Maybe if the 6TB was brand new with factory pre-formatting then TB may work OK but who knows (can’t help but feel that there are so many reports of error 50’s that LaCie know of a bug/fix but they play their cards close to their chest like Apple and I haven’t got the patience to deal with them)

Software - OSX
May 08, 2016

Mac Mini 2012 – Upgrade from 10.9.5 (Mavericks) to 10.11.3 (El Capitan).

Close ...
Decided to uprade the mini since Mavericks only supported up to Python 2.7 and I needed Python 3. Rather than try to shoehorn Python 3 into Mavericks an upgrade to El Capitan was done (seems to be reasonably OK as an OS).
An upgrade was done rather than a clean install and appears to have gone quite well. All of the connected devices work OK and no real showstoppers yet.


Aperture 3.5.1 broke – needed to upgrade to 3.6
iPhoto broke – update allowed when El Capitan was installed.
Note: both these apps are of course legacy with the new Photos app being used.

iTunes – this was the biggest hassle as I had uninstalled iBooks on Mavericks to allow iTunes to manage my books/pdfs but of course the El Capitan upgrade re-installs iBooks and removes the titles from iTunes.
I tried to customise iTunes again but El Capitan has SIP technology which hinders the removal of system related files/services so I have to bite the bullet and use iBooks. Some changes have been done to iBooks to allow metadata changes but it is still a very primitive app compared to iTunes which managed all my media very satisfactorily. It almost seems that Apple is more intent on keeping the ‘walled garden’ intact than improving the usability of their media apps.

Ref: te/

The 10.11.4 update just released installed OK.

Application – PDFSam broke – needed to install Java 6 runtime

Application – RSSOwl broke – needed to install Java 6 runtime

Xcode – for some reason 7.2.1 needed to update twice

Application – LaunchPadManager – app pages in app don’t equate with LaunchPad pages
Eg: if 6 pages of apps in LaunchPad then use pages 2 ~ 7 in LaunchPadManager and result in layout and LaunchPad will be pages 1 ~ 6

Ethernet 0 was nonoperable after mini had been in sleep mode (doesn’t happen every time).
Network Preferences showed the connection status as Connected and currently active with an IP address but not working – both DNS and pinging was non-functional. Under the WINS parameters the Workgroup was showing as WORKGROUP (default) and although it could be changed the change would not be applied.

Using Terminal –

sudo ifconfig en0 down

sudo ifconfig en0 up

Ethernet interface working again and workgroup back to the previous name (HOMELAN).

All in all not too painful but I will be trying hard to live with the crappy iBooks and watching for the ethernet problem – oh and yes the ‘look’ of El Capitan is very much ‘it grows on you’ compared to the more polished look of Mavericks (some of the icons in the dock look rather insipid).

121 Posts. Displaying page 13 of 13.

Go to page: